User Manual

MDS 05-4055A01, Rev. A MDS entraNET 900 System Guide (Preliminary) 83
Figure 3-4. entraNET Management System Menu Flowchart
(Security, Performance & Maintenance Menus are abbreviated.
See Figure 2-2 on Page 17 for details for these areas.)
NOTES • Not all items are user configurable • Some menu items depend on Device Mode • Dotted lines indicate read-only items
• Basic configuration parameters are shown in boxes • Use keyboard’s spacebar to make some menu selections • AP = Access Point Only • RMT = Remote Only
User Password Console Baud Rate Device Names Device Name
Owner
Contact
Description
Location
Date Time Date Format Model Number Serial Number Hardware Version Firmware Version Uptime
Network Configuration
Radio Configuration
Serial Gateway Configuration
Device Information Maintenance
Security Configuration
Provisioning Approved Remotes List (AP) Approved Access Points
(RMT)
Encryption Encryption Phrase HTTP Access HTTP Security Mode Auto Key Rotation (AP) Force Key SNMP Access User Password Telnet Access
Reprogramming Configuration Scripts Authorization Key
Serial Config. Wizard COM1 & COM2 Serial Data Port Status
Mode
Data Baud Rate
Flow Control
Send to Address
Sent to Port
Receive on Port
Receive on
Address
Seamless Mode
Delimiter
Buffer Size
Serial Data Statistics
STARTING INFORMATION SCREEN
MAIN MENU
RF Output Power Data Rate Dwell Time Beacon Period Hop Pattern Seed
(AP)
Fragmentation Threshold RTS Threshold RSSI Threshold (RMT) SNR Threshold RF Hopping Format Skip Zone Options
Device Mode Network Name IP Address IP Netmask IP Gateway SNTP Server (IP) DHCP Client DHCP Server Config. SNMP Config. Menu Max. Allowed Remotes
(AP)
Ethernet Address
Wireless Address
Ethernet Link Watch (AP)
Performance Information Event Log Packet Statistics Wireless Network Status
(RMT)
Remote Listing (AP) Endpoint Listing (AP) Remote Perf. Listing (AP) RF Power Output Signal-to-Noise RSSI Actual Data Rate
Diagnostic Tools
Radio Test Test Mode
Frequency
TX Output Power
TxKey
RSSI
Ping Utility