User's Manual

MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 25
6. The current settings are shown. Click Commit Changes to apply all
settings and exit the Serial Wizard.
Invisible place holder
Figure 15. Serial Wizard's Commit Changes Screen
Configure QOS
Quality of service is configured on the Base Station through the use of
service flows. The service flows can be created through the web
interface and through the use of QoS configuration scripts. The web
interface displays the active service flows as well the user-configured
flows. Depending on the desired effect, the service flows are created
with different service types and parameters. For example, service flows
can be created to give priority to a particular traffic flow, to allocate a
specific amount of bandwidth for a traffic flow, to restrict the amount of
bandwidth, or to minimize the latency experienced by a traffic flow.
