User's Manual

MDS 05-6302A01, Rev. B MDS Mercury 16E Technical Manual 69
SNMP Mode This parameter specifies the
protocol(s) that the SNMP agent
should support.
Disabled
Disabled, V1-only, V2-only,
V3-only, V1-V2, V1-V2-V3
Read Community SNMP community name with
SNMPv1/SNMPv2c read access. This
string.
<blank>
Can contain up to 30
alpha-numeric characters
Write Community SNMP community name with
SNMPv1/SNMPv2c write access. This
string.
<blank>
Can contain up to 30
alpha-numeric characters
V3 Password Mode Determines whether V3 passwords will
be managed locally
Manager
Manager, Local
V3 Auth Password Authentication password stored in
flash memory. This is used when the
Agent is managing passwords locally
(or initially for all cases on reboot). This
is the SNMPv3 password used for
Authentication (currently, only MD5 is
supported). This string can contain up
to 30 alpha-numeric characters.
<blank>
Up to 30 alpha-numeric
characters
V3 Priv Password Privacy password stored in flash
memory. Used when the SNMP Agent
is managing passwords locally (or
initially for all cases on reboot). This is
the SNMPv3 password used for
privacy (DES encryption). This string
can contain between 8 and 30
alpha-numeric characters.
<blank>
Between 8 and 30
alpha-numeric characters
Traps Version This specifies which version of SNMP
is used to encode the outgoing traps.
v1_traps, v2_traps, or
v3_traps.
(When v3_traps is selected,
v2-style traps are sent, but
with a v3 header.
Trap Community SNMP community name with
SNMPv1/SNMPv2c trap access. This
string can contain up to 30
alpha-numeric characters.
<Blank>
Trap Manager #1-4 IP location on the network to which
traps are sent.
<blank>
Any standard IP address
Auth Trap Status Indicates whether or not traps are
generated for failed authentication of
an SNMP PDU.
Disabled
Enabled, Disabled
Iperf Status
Iperf Status Enable Iperf Server that can be used
for throughput testing.
Disabled
Disabled, Enabled
Configuration –
Security
Device Security
Table 17. Configuration Parameters (Continued)
Menu Location Parameter Name Description Default Value
Possible Values