User's Manual
58 Mercury Reference Manual 05-4446A01, Rev. C
Invisible place holder
Figure 3-25. SNTP Server Entry (on Network Configuration Menu)
When SNTP Server is selected (item H), the area to the right of the param-
eter becomes active, allowing you to enter a valid SNTP server address.
Press the Return key to make the address entry active.
3.5 RADIO CONFIGURATION
There are two primary layers in the transceiver networkradio and
data. Since the data layer is dependent on the radio layer working prop-
erly, configure and set the radio items before proceeding. This section
explains the Radio Configuration Menu, (
Figure 3-26 for AP,
Figure 3-27 for Remote).
3.5.1 Radio Configuration Menu
Figure 3-26. Radio Configuration Menu
(From Access Point)