User's Manual

94 Mercury Reference Manual 05-4446A01, Rev. C
Invisible place holder
Figure 3-60. Redundancy Configuration Menu (AP Only)
¥ Redundancy ConfigurationEnable/disable redundancy switcho-
ver for AP. [
enabled, disabled; disabled]
¥ Network Event TriggersThis selection opens a submenu
(
Figure 3-61 on Page 95) where you can set/view the trigger sta-
tus for Network Events.
¥
Radio Event TriggersThis selection opens a submenu
(
Figure 3-62 on Page 95) where you can set/view the trigger sta-
tus for Radio Events, such as a loss of associated Remotes or
excessive packet errors.
¥
Hardware Event TriggersThis selection opens a submenu
(
Figure 3-63 on Page 96) where you can set/view the trigger sta-
tus for initialization/hardware errors.
¥
Redundancy Configuration OptionsThis selection opens a sub-
menu (
Figure 3-64 on Page 96) where you can set the threshold
criteria for declaring an error event.
¥
Force SwitchoverSelecting this option forces a manual (user
initiated) switchover to the backup AP. The challenge ques-
tion
Are you sure? (y/n) is presented to avoid an unintended
switchover. To invoke the change, press the letter
y followed by
the Enter key.