User's Manual

05-4446A01, Rev. C Mercury Reference Manual 113
3.12 MAINTENANCE/TOOLS MENU
In the course of operating your network, you may wish to upgrade trans-
ceiver firmware to take advantage of product improvements, work with
configuration scripts, conduct ping tests of your system, or reset oper-
ating parameters to factory default settings. All of these tasks are per-
formed using the Maintenance/Tools Menu (
Figure 3-86). This section
explains how to take advantage of these services.
Invisible place holder
Figure 3-86. Maintenance/Tools Menu
¥ ReprogrammingManaging and selecting the units operating
system firmware resources.
(
See Reprogramming Menu on
Page 114
)
¥ Configuration ScriptsSaving and importing data files contain-
ing unit operating parameters/settings.
(
See Configuration
Scripts Menu
on Page 119
)
¥ Ping UtilityDiagnostic tool to test network connectivity.
(
See Ping Utility Menu on Page 122)
¥
Authorization CodesAlter the units overall capabilities by
enabling the built-in resources. (
See Authorization Codes on
Page 123
)
¥ Reset to Factory DefaultsRestores parameters to factory default
settings. (
See Reset to Factory Defaults on Page 123)
¥
Radio TestA diagnostic tool for testing RF operation.
(
See Radio Test Menu on Page 125)
¥
Firmware VersionsShows the firmware code versions stored in
the radio and indicates which one is the active image. (See
Figure 3-87 on Page 114.)
¥
Auto Firmware UpgradeBrings up a submenu where you can
perform tasks related to loading new firmware. (
See Auto
Firmware Upgrade Menu (AP Only) on Page 124
.)
¥
Telnet UtilityA submenu for opening Telnet connections to net-
work devices (
Figure 3-88 on Page 114).