User's Manual

05-4446A01, Rev. C Mercury Reference Manual 61
Invisible place holder
Figure 3-30. Frequency Control Menu
(Hopping w/Hand-offs Freq. Mode [Remote only])
¥ Frequency ModeThe unit can operate on one selected fre-
quency or frequency hop. Remotes have the option of using a
static hopping configuration or using the AP locations file to
select an AP and perform hand-offs. For more information on
hand-offs, see
Table 3-2 on Page 64. Changing this parameter
requires a radio reboot.
[
Static Hopping, Hopping with Hand-offs, Single Channel;
Single Channel]
NOTE: Frequency Mode Static Hopping on Access Points requires
TDD Sync Mode GPS Required.
Channel/Frequency Allocations for Single Channel operation
are shown in
Table 3-1. The transceiver utilizes up to 14 chan-
nels (0-13) depending on the bandwidth used (1.75 MHz or
3.5 MHz).
Table 3-1. Channel/Frequency Allocations
Channel 1.75 MHz B/W 3.5 MHz B/W
0 903.000000 904.000000
1 904.800000 907.600000
2 906.600000 911.400000
3 908.600000 915.000000
4 910.400000 918.600000
5 912.200000 922.400000
6 914.000000 926.000000
7 916.000000
8 917.800000
9 919.600000