User's Manual

126 Mercury Reference Manual 05-4446A01, Rev. C
• Test Transmit Power—Sets/displays the transmitter’s power set-
ting. Make a numerical entry within the allowable range.
[-30 to +30 dBm]
• Test Channel—Sets/displays the radio’s test channel number.
Make a numerical entry within the allowable range.
[0-13; 0]
• Test RF Bandwidth—Sets/displays the transmitter’s bandwidth for
testing. Use the Spacebar to view selections.
[1.75. 3.5 MHz; 1.75 MHz]
• Test Burst Percentage—Sets/displays the percentage of Burst size
to use for testing. Make a numerical entry within the allowable
range. [0-100%; 100]
Spectrum Analyzer Menu (Remote Only)
Using this menu, you can enable or disable the remote’s spectrum ana-
lyzer mode (
Figure 3-99 on Page 126). When enabled, the remote dis-
plays through the terminal a spectrum analyzer view of its transmit
power and frequency (
Figure 3-100 on Page 127).
Figure 3-99. Spectrum Analyzer Menu