User's Manual

05-4446A01, Rev. C Mercury Reference Manual 27
* The LAN connector has two integrated LEDs to indicate signal activity
as follows: A steady green LED indicates that a link has been
achieved; a flashing green LED indicates data activity, and a yellow
LED indicates 100 Mbps operation.
GPS ON Internal GPS receiver is
synchronized with the satellite
network.
Blinking AP modem is synchronizing
with the GPS timing.
OFF Internal GPS receiver is not
synchronized with the satellite
network.
LINK
(Access Point)
ON Default state
OFF Not transmitting. Usually
occurs while waiting for GPS
sync.
LINK
(Remote)
ON Associated to AP
OFF Not associated with AP
Table 2-2. Transceiver LED Functions (Continued)
LED Label Activity Indication