User's Manual

05-4446A01, Rev. C Mercury Reference Manual 43
• Performance Information—Status information relating to the radio
and data layer’s performance in the radio network.
(
See “PERFORMANCE INFORMATION MENU” on
Page 101
)
• Maintenance/Tools—Tools for upgrading firmware code and test-
ing major unit capabilities. (
See “MAINTENANCE/TOOLS
MENU” on Page 113
)
3.4 CONFIGURING NETWORK
PARAMETERS
3.4.1 Network Configuration Menu
The Network Configuration Menu is the home of several parameters that
you should review and set as necessary before placing a transceiver into
service.
Figure 3-11. Network Configuration Menu
• Network Interface Config—Presents a menu where you can view or
set various parameters (VLAN Status, IP Configuration, and
DHCP Server Configuration).
• Ethernet Port Config—Presents a menu for defining the status of
the Ethernet port (enabled or disabled), port follows association,
and Ethernet filtering configuration. Detailed explanations of
this menu are contained in
Ethernet Port Configuration Menu on
Page 51
.
• Bridge Configuration—View/set options for Ethernet Bridge oper-
ation.
• SNMP Agent Config—View/set SNMP configuration parameters.
See “SNMP Agent Configuration” on Page 53 for more infor-
mation.