User's Manual

05-4446A01, Rev. C Mercury Reference Manual 83
5. When the next screen appears (Figure 3-48), press A to select the
desired data baud rate and B to select the data byte format. Press N to
continue.
Figure 3-48. Select Data Baud Rate and Byte Format
6. The screen shown in
Figure 3-49 appears next. Press A to select the
Buffer Size of message packets, and B to select the Inter-Frame
Delay. Press N to continue with the wizard.
Invisible place holder
Figure 3-49. Buffer Size and Inter-Frame Delay Values
7. On the next screen (
Figure 3-50 on Page 84), select A and use the
spacebar to enable the serial port for data communication. Press N to
continue the wizard.