User's Manual

05-4446A01, Rev. C Mercury Reference Manual 129
3.13.1Proper OperationWhat to Look For
Table 3-12 and Table 3-13 on Page 130 show target performance values
for AP and Remote transceivers. View these values using the built-in
menu system by navigating the path shown under each table title.
For Optimal Sensitivity
(Trades off throughput for best possible sensitivity. AP more susceptible to interference)
AP Remote Units Notes
Radio
Configuration
Receive
Power
-80 N/A dBm Sets AP receiver for highest gain.
When Heavy Interference Exists at AP
(Trades off range for robustness in the face of interference)
AP Remote Units Notes
Radio
Configuration
Receive
Power
-60 N/A dBm Sets AP receiver for low gain,
which forces Remote transmit
power to be high.
For Nomadic Systems
(Where hand-offs between APs are required)
AP Remote Units Notes
Radio
Configuration
Frequency
Control
Frequency
Mode
Static
Hopping
Hopping
w/Hand-offs
Advanced
Configuration
Protection
Margin
6 6 dB More channel variation, so
use more robust modulation
with greater SNRs.
Channel Type Static N/A Less periodic ranging when
Channel Type = Static.
Network
Configuration
AP Location
Info Config
Retrieve Text
File
N/A AP
Locations file
AP locations file with
coordinates and key
attributes of APs to which
Remote can associate.
Table 3-12. Mercury Remote Transceiver
(Performance Information>>Internal Radio Status Menu)
Name Target Value Notes
Connection Status Associated Remote must be associated
for network operation.
Transmit Power Varies Adjusts automatically as
requested by AP.
RSSI
(Received Signal
Strength Indication)
Varies The less negative an RSSI
reading, the stronger the
signal (i.e., -75 dBm is stronger
than -85 dBm).