User's Manual

05-4446A01, Rev. C Mercury Reference Manual 123
Authorization Codes
Invisible place holder
Figure 3-95. Authorization Codes Menu
¥ Authorization KeyFor entering an Authorization Key into the
transceivers non-volatile memory.
¥
Authorized FeaturesList of the transceivers authorized fea-
tures. Each item shows
enabled or disabled according to the set-
tings allowed by the Authorization Key entered into the radio.
Reset to Factory Defaults
Use the
Reset to Factory Defaults selection on the Maintenance/Tools
Menu to return all configurable settings to those set at the factory prior
to shipping. Use this selection with caution, as you will lose any custom
settings you have established for your transceiver, and will need to
re-enter them using the menu system.
To prevent accidental use of the command, a challenge question is
presented at the bottom of the screen when this choice is selected (see
Figure 3-96 on Page 124). To proceed, enter
y for yes or n for no, and
then press Enter. (You may also press the Escape key on your keyboard
to exit this command without making any changes.)