Reference Manual

05-4446A01, Rev. E Mercury Reference Manual 91
5. When the next screen appears (Figure 3-57), press A to select the
desired data baud rate and B to select the data byte format. Press N to
continue.
Figure 3-57. Select Data Baud Rate and Byte Format
6. The screen shown in
Figure 3-58 appears next. Press A to select the
Buffer Size of message packets, and B to select the Inter-Frame
Delay. Press N to continue with the wizard.
Invisible place holder
Figure 3-58. Buffer Size and Inter-Frame Delay Values
7. On the next screen (Figure 3-59 on Page 92), select A and use the
spacebar to enable the serial port for data communication. Press
N to
continue the wizard.