Reference Manual

05-4446A01, Rev. E Mercury Reference Manual 113
Event Log Menu
Invisible place holder
Figure 3-85. Event Log Menu
• Current Alarms—Shows active alarms (if any) reported by the
transceiver.
• View Event Log—Displays a log of radio events arranged by event
number, date, and time. (Example shown in
Figure 3-86 on
Page 114
).
•
Clear Event Log—Erases all previously logged events.
• Send Event Log—Sends the event log to the server. You must
answer the challenge question Send File? y/n before the request
proceeds.
• Event Log Host Address—Set/display the IP address of the TFTP
server. [any valid IP address; 0.0.0.0]
• Event Log Filename—Set/display the name of the event log file on
the TFTP server. [any valid filename; eventlog.txt]
• Transfer Options—A menu for configuring the TFTP transfer.
• Syslog Server Address—Use this selection to set or view the IP
address of the Syslog server. Syslog is a standardized protocol
for sending IP log data across a network. Low cost (or even free)
Syslog downloads are available online by searching for the term
“Syslog Server.” [
any valid IP address; 0.0.0.0]