Reference Manual

05-4446A01, Rev. E Mercury Reference Manual 123
• RX Frequency Offset—This is a measurement of how far in fre-
quency the Remote’s receiver has shifted (in Hz) to accommo-
date the incoming signal from the AP.
•
Total FEC Count—This parameter shows the total number of For-
ward Error Correction (FEC) blocks handled by the radio.
• Corrected FEC Count—Displays the number of errored blocks
corrected with FEC by the radio.
• Uncorrected FEC Count—Shows the number of errored blocks
that can’t be corrected with FEC by the radio.
Invisible place holder
Figure 3-99. Channel Statistics Menu
3.12 MAINTENANCE/TOOLS MENU
In the course of operating your network, you may wish to upgrade trans-
ceiver firmware to take advantage of product improvements, work with
configuration scripts, conduct “ping” tests of your system, or reset oper-
ating parameters to factory default settings. All of these tasks are per-
formed using the Maintenance/Tools Menu (
Figure 3-100). This section
explains how to take advantage of these services.