Reference Manual

05-4446A01, Rev. E Mercury Reference Manual 45
• Security Configuration—Tools to configure the security services
available with the transceiver’s environment. (
See “SECURITY
CONFIGURATION MENU” on Page 92)
•
Redundancy Configuration—(AP Only) Allows setting of the cri-
teria for switchover in the event of loss of associated Remotes
or excessive packet receive errors.
•
GPS Configuration—(Remote Only; not available on MDS 3650
model) View/set parameters related to GPS streaming location
output. (
See “GPS CONFIGURATION (REMOTE ONLY)” on
Page 107)
•
Device Information—Top level device fields such as model, serial
number, date/time, etc. (
See “DEVICE INFORMATION
MENU” on Page 109)
•
Performance Information—Status information relating to the radio
and data layer’s performance in the radio network.
(
See “PERFORMANCE INFORMATION MENU” on
Page 110)
•
Maintenance/Tools—Tools for upgrading firmware code and test-
ing major unit capabilities. (
See “MAINTENANCE/TOOLS
MENU” on Page 123)
3.4 CONFIGURING NETWORK
PARAMETERS
3.4.1 Network Configuration Menu
The Network Configuration Menu is the home of several parameters that
you should review and set as necessary before placing a transceiver into
service.
Figure 3-12. Network Configuration Menu
(Standard radio)