Reference Manual

54 Mercury Reference Manual 05-4446A01, Rev. E
• Static IP Gateway—The IPv4 address of the network gateway
device, typically a router. This field is unnecessary if DHCP is
enabled. [
0.0.0.0]
The lower three items on the screen (Current IP Address, Net-
mask and Gateway) show the actual addressing at the trans-
ceiver whether it was obtained from static configuration or from
a DHCP server.
802.11 Configuration Submenu
Invisible place holder
Figure 3-21. 802.11 Configuration Submenu
• 802.11 Mode—Configures the WiFi radio to be an Access Point
for other WiFi devices (Access Point), to connect to a WiFi
Access Point at another location (Station), to connect directly to
another WiFi device (Ad-Hoc), or to be disabled (disabled). The
default setting is disabled.
• 802.11 SSID—Service Set Identifier, the name of the wireless
LAN to which to connect. This is equivalent to Network Name
in GE MDS terminology.
•
802.11 Channel—(Applies only when 802.11 Mode is set to Access
Point) Sets the 802.11 channel the device will use. This can only
be set to Auto when in Station mode.