Reference Manual

05-4446A01, Rev. E Mercury Reference Manual 57
• Eth Port Follows Association (Remote Only)—When enabled, the
Ethernet port is disabled until the Remote associates. This
allows a PC or laptop connected to the Remote to know when
the wireless link is available. This feature helps middleware on
the laptop in making connectivity decisions. In addition, if the
Remote moves between Access Points on different subnets,
then the laptop can DHCP for a new address when the link
comes back up. [
enabled, disabled; disabled]
• Ethernet Filtering Config—Allows enabling/disabling filtering and
specifying of Ethernet addresses.
Ethernet Filtering Configuration Menu
Invisible place holder
Figure 3-25. Ethernet Filtering Configuration Menu
• Enable Filtering—Activates Ethernet filtering.
[enabled, disabled; disabled]
• Address 1, 2, 3, 4—Ethernet address fields. When filtering is
enabled, the Mercury only accepts traffic on its Ethernet port
from the configured addresses.
[
Valid MAC address string]