User Manual

MDS 05-4670A01, Rev. E SD Series Reference Manual (x710 Mode) 49
Three methods can be used to load new firmware into the radio: Web
reprogramming, TFTP, and Serial Transfer. Firmware reprogram-
ming is best handled using the web-based Device Manager. Instructions
for these methods of transfer are given below, beginning with Web pro-
gramming.
Web Method
Determining Current
Firmware Version
This screen shows Bootloader version information and indicates which
firmware image (1 or 2) is currently active, as well as the firmware ver-
sion of each image. The information on this screen is read-only.
• Refresh —Clicking this button updates the displayed information
on demand.
• Auto —Initiates automatic updating of the information. A time (in
seconds) may be entered in the box provided, to specify how often
the display is updated.
NOTE: The latest firmware version for this product can be obtained at
www.gemds.com.
Web
Reprogramming
In the space provided, enter the *.mpk file to reprogram into this radio,
then click Program to start the file upload process. Do not click away
from this page until the upload has finished processing.