Users Manual

96 MDS™ Master Station MDS 05-6399A01, Rev. G
ln-status test test-state stop
Test Mode
Ensure the CLI is in operational mode.
To enter Test Mode and key the transmitter for 5 minutes:
> request interfaces-state interface lnms ln-status test-mode state keyed time 5
To enter Test Mode’s receive state for 5 minutes:
> request interfaces-state interface lnms ln-status test-mode state receive time 5
To exit Test Mode:
> request interfaces-state interface lnms ln-status test-mode state stop
To display the current test state:
> show interfaces-state interface lnms ln-status test
5.12 LN-x/0/0 interfaces
Figure 5-18 ln-x/0/0 Ln statistics
The lnms interfaces shows the active nics statistics while the ln-nic interface shows the statistics
of each nic, active or not. It has the additional parameter of active nic, which indicates if this nic
is active in particular. All other parameters are the same as the lnms interface.