Users Manual

MDS 05-6399A01, Rev. G MDS™ Master Station 7
Canada, IC ERP Limits
IC SRSP-501, 6.3.2. Limits the ERP to 125W for fixed point-to-point operation. For IC use, the
antenna gain and Transmit power must be set to meet the ERP limit of 125W. This can be ac-
complished by using the appropriate at antenna gain in combination with the RF power settings
Environmental Information
The equipment that you purchased has required the extraction and use of natural resources for its
production. Improper disposal may contaminate the environment and present a health risk due to
hazardous substances contained within. To avoid dissemination of these substances into our en-
vironment, and to diminish the demand on natural resources, we encourage you to use the appro-
priate recycling systems for disposal. These systems will reuse or recycle most of the materials
found in this equipment in a sound way. Please contact GE MDS or your supplier for more infor-
mation on the proper disposal of this equipment.
ISO 9001 Registration
GE MDS adheres to this internationally-accepted quality system standard.
Quality Policy Statement
We, the employees of GE MDS, are committed to achieving total customer satisfaction in every-
thing we do.
Total Customer Satisfaction in:
• Conception, design, manufacture, and marketing of our products.
• Services and support we provide to our internal and external customers.
Total Customer Satisfaction Achieved Through:
• Processes that are well documented and minimize variations.
• Partnering with suppliers who are committed to providing quality and service.
• Measuring our performance against customer expectations and industry leaders.
• Commitment to continuous improvement and employee involvement.
Revision Notice
While every reasonable effort has been made to ensure the accuracy of this manual, product im-
provements may result in minor differences between the manual and the product shipped
to you. If you have additional questions or need an exact specification for a product, please
contact our Customer Service Team using the information at the back of this guide. In ad-
dition, manual updates can often be found on our Web site at www.gemds.com.
ESD Notice
To prevent malfunction or damage to this radio, which may be caused by Electrostatic Discharge
(ESD), the radio should be properly grounded by connection to the ground stud on the rear panel.
In addition, the installer or operator should follow proper ESD precautions, such as touching a