Users Manual

38 MDS™ Master Station MDS 05-6399A01, Rev. G
• Eth Phy Rate - Choose the Ethernet speed support setting (DEFAULT ALL)
- Eth 10Mb Half
- Eth 10Mb Full
- Eth 100Mb Half
- Eth 100Mb Full
• Enabled - Enable or disable the use of an IP address
• Forwarding - Indicates if IPv4 packet forwarding is enabled or disabled on this interface.
True (DEFAULT) / False
• Mtu - The size, in octets, of the largest IPv4 packet that the interface will send and
receive. Range 68-65535 - 1500 (DEFAULT). (Advanced setting)
• Address - Use for creating static IPv4 IP address and removing this interface from the
built-in Network Bridge.
• Neighbor- Use for creating mappings from IPv4 addresses to link-layer addresses.