Users Manual

48 MDS™ Master Station MDS 05-6399A01, Rev. G

Table

. Modem Selection vs. Speed, Bandwidth & Sensitivity

Modem Type Se-

lection

Over-the-air

Speed (bps)

B/W (kHz)

Approximate

Sensitivity

(dBm)

ETSI Compli-

ance

9600

9600 12.5 -112

9600N 9600 6.25 -98

19200N 19200 12.5 -100

19200 19200 25 -105

38400N 38400 25 -99

65000

65000 50 See note 3

4800

4800 12.5 -112 X

9600M

9600 12.5 -106 X

19200E 19200 12.5 -96 X

19200M 19200 25 -106 X

38400E 38400 25 -97 X

1. For MDS x710-compatible operation.

2. 3200 bps not applicable to SD4.

3. Only available with SDM9D Radio Modules.

4. Not ETSI compliant on SDM4 Radio Modules.

Dlink

Dlink is a GE MDS-proprietary protocol used for diagnostics communications.

• Unit – This parameter identifies the radio in the wireless network with a specific ID

during diagnostic sessions. For compatibility with legacy devices, the value must be

10000 or greater (2710 in hexadecimal).

• Type – This setting identifies the radio as a Node, Root, Repeater, Peer, or Gate. Each of

these are operating modes of the transceiver with respect to diagnostic/management

activities.

• Mode – Configure if Dlink will operate on a serial port, or via a TCP socket.

• Serial Mode Settings: