Users Manual

ManualsBrandsGE MDS ManualsElectronicsMDS SDM4 Licensed Spectrum Module

100

92 MDS™ Master Station MDS 05-6399A01, Rev. G

qam16-threshold -85;

qam64-threshold -70;

}

Remote Mode

The following will configure the LN module as a Remote with the network name of 'MyNet-

work' and default settings. For this example we assume the inverse of the AP frequency plan – a

transmit frequency of 456.4 MHz and a receive frequency of 451.4 MHz. Your own LN frequen-

cies must be set according to your user license.

% set interfaces interface lnms ln-config device-mode remote network-name MyNetwork tx-

frequency 456.4 rx-frequency 451.4

% show interfaces interface lnms ln-config | details

radio-mode standard;

device-mode remote;

network-name MyNetwork;

data-compression lzo;

header-compression true;

power 40;

tx-frequency 456.4;

rx-frequency 451.4;

channel 12.5KHz-9.6ksps;

modulation automatic;

fec false;

security {

security-mode none;

encryption none;

}

advanced-config {

data-retries 3;

nic-id 0;

inactivity-timeout 600;

remote-age-time 600;

arp-cache false;

qam16-threshold -85;

qam64-threshold -70;

}

Security Configuration

The default security mode, as shown above, is none. The following configures the LN module to

use pre-shared key authentication with the passphrase “mypassphrase” and aes256-ccm encryp-

tion.

NOTE

When viewing the configuration, the passphrase that you entered is not displayed in plaintext.

This is a security measure.

% set interfaces interface lnms ln-config security encryption aes256-ccm security-mode

psk passphrase mypassphrase