User's Manual

MDS 05-6399A01, Rev. D MDS Master Station 9
vice is responsible for compliance with all applicable limits on radiated RF power, and the RF
power output may need to be adjusted to maintain compliance, depending on the gain of the an-
tenna system.
All power supply main connections and disconnections must be made by a qualified electrical
installer.
When servicing energized equipment, be sure to wear appropriate Personal Protective Equipment
(PPE). During internal service, situations could arise where objects accidentally contact or short
circuit components and the appropriate PPE would alleviate or decrease the severity of potential
injury. When servicing radios, all workplace regulations and other applicable standards for live
electrical work should be followed to ensure personal safety.
ISO 9001 Registration
GE MDS adheres to this internationally-accepted quality system standard.
Quality Policy Statement
We, the employees of GE MDS, are committed to achieving total customer satisfaction in eve-
rything we do.
Total Customer Satisfaction in:
• Conception, design, manufacture, and marketing of our products.
• Services and support we provide to our internal and external customers.
Total Customer Satisfaction Achieved Through:
• Processes that are well documented and minimize variations.
• Partnering with suppliers who are committed to providing quality and service.
• Measuring our performance against customer expectations and industry leaders.
• Commitment to continuous improvement and employee involvement.
Revision Notice
While every reasonable effort has been made to ensure the accuracy of this manual, product im-
provements may result in minor differences between the manual and the product shipped to you.
If you have additional questions or need an exact specification for a product, please contact our
Customer Service Team using the information at the back of this guide. In addition, manual up-
dates can often be found on our Web site at
www.GEmds.com.
ESD Notice
To prevent malfunction or damage to this radio, which may be caused by Electrostatic Discharge
(ESD), the radio should be properly grounded by connection to the ground stud on the rear panel.