User's Manual

MDS 05-4121A01, Rev. 02 TRM SB Integration Guide v
Manual Revision and Accuracy
While every reasonable effort has been made to ensure the accuracy of
this guide, product improvements may result in minor differences
between the manual and the product shipped to you. If you have addi-
tional questions or need an exact specification for a product, please con-
tact the factory using the information at the back of this guide. In
addition, manual updates can be found online at www.gemds.com.
FCC Part 15 Notice
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try
and correct the interference by one or more of the following measures:
• Reorient or locate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
This Class B digital apparatus complies with Canadian ICES-003. Cet
appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Changes or modifications not expressly approved by the party respon-
sible for compliance could void the user's authority to operate the equip-
ment. This Licensed transmitters is approved as a module for
installation into the final devices providing this FCC criteria is met:
•The final device is designed for mobile or fixed operation.
•The maximum antenna gain to allow compliance with RF exposure
requirement that is listed on the Grant of Certification must be followed.
•The licensed module has an FCC ID label on the module itself. That
FCC ID label must be visible through a window on the final device, or
it must be visible when an access panel, door or cover is easily removed.
If not, a second label must be placed on the outside of the final device
that contains the following text: "Contains FCC ID: E5MDS-TRM450.”