User Manual Part 6

4-18 ApexPro™ 2001989-301A- draft 1
System setup
Control settings (temporary)
Control settings allow you to make temporary adjustments to some of the system and
clinical application settings of the CIC Pro center. Control settings are temporary,
meaning they apply to a selected patient and are erased when the patient is
discharged.
For detailed control setting information, including displayed waveform, Alarm
Control, parameter control and print settings, refer to the CIC Pro Clinical
Information Center Operator’s Manual.To adjust the Alarm Volume, refer to Alarm
volume on page 4-18.
Alarm volume
To adjust the Alarm Volume for a telemetry patient at the CIC Pro center, follow these
steps:
1. From the multi-patient viewer, click CIC Setup > CIC Defaults to display the
current alarm volume.
053A
2. Click the down arrow next to Minimum and select the desired Alarm Volume.
The minimum Alarm Volume can be set between OFF and 100%.
3. Click the down arrow next to Current and select the desired Alarm Volume
above the minimum volume setting. The current alarm level determines the
actual alarm volume.
4. Click Apply.
Draft