User Manual Part 7

Viewing real-time patient data
2001989-301A- draft 1 ApexPro™ 7-3
059A
Single patient viewer
The single patient viewer displays detailed real-time parameter data for a selected
patient. You can complete the following tasks from the single patient viewer:
 View detailed real-time parameter data.
 View, change, or print Alarm Control or parameter control settings for any in-
unit patient. These changes are also adopted by the monitor. See Adjusting alarm
control settings on page 5-8. See Adjusting parameter control settings on page 7-
11.
 View Alarm Control or parameter control settings for out-of-unit patient beds on
the Unity Network. See Adjusting alarm control settings on page 5-8. See
Adjusting parameter control settings on page 7-11.
Multi-patient viewer menu bar options
Option Function
Auto Display When enabled, the Auto Display button is selectable from the
menu bar.
Clicking the Auto Display button while viewing the multi-
patient viewer automatically completes the following tasks:
 Removes any un-locked, unoccupied beds.
 Adds at least one empty patient window with an Admit
button.
 Resizes the remaining patient windows to maximize the
amount of displayed patient data.
View Other View any patient bed on the Unity Network that is inside or
outside of the care unit, floor, or hospital. See In-unit patient
beds on page 7-5. See Out-of-unit patient beds on page 7-6.
CIC Setup
View the
CIC Pro center default settings. You can customize
some of the user-level defaults. See Customizing the system
on page 4-4.
Silence Alarms Silence audible alarm tones for one minute. See Silencing
alarms on page 5-7.
Graph All Print the parameter limits or the waveform data for all patients
in the care unit.
Browser Access stored patient data from the web access server.
Draft