User Manual Part 7

7-4 ApexPro™ 2001989-301A- draft 1
Viewing real-time patient data
NOTE
You cannot change the Alarm Control or parameter control settings of an
out-of-unit patient.
 Adjust the real-time trend window for any in-unit patient. See Configuring the
real-time trend window on page 7-6.
 Print real-time parameter data and waveforms for any in-unit patient. See
Printing real-time data on page 7-8.
The single patient viewer displays menu bar options similar to the following:
060A
Single patient viewer menu bar options
Option Function
Real-Time View Return to the real-time display of patient data.
Admit Display the Admit window.
Monitor Setup... Temporarily adjust a patient’s parameter, alarm, or print
control settings.
Patient Data... Display stored patient data. See Chapter 8.
System Utilities... Access web access server data.
View all ECG Display waveforms for ECG leads I, II, III, V, aVR, aVL, and
aVF.
Sample Record and store a 10-second sample of a patient’s real-time
ECG data. Data samples are stored in Events directory.
 Monitor: Parameter numeric data and up to three
waveforms.
 Telemetry: ECG waveforms only.
Relearn Relearn the selected patient’s ECG rhythm after changes
occur to heart rate or rhythm. The CIC Pro center uses 14
current complexes to relearn the patient’s ECG pattern.
The heart rate value appears briefly as Xs during the relearn
process and returns to numerics when the relearn process is
complete.
Configuration Configure the selected patient’s real-time trend window. See
Configuring the real-time trend window on page 7-6.
Draft