User Manual

Revision A - Draft 7 APEX, ApexPro, and ApexPro CH Transmitter Programming Instructions 31
2001989-135
Apex Transmitter
Appendix 2: Access Apex Technical Functions
Several high-level technical functions are available by following the steps in
“Access the Super User Mode” below. Technical functions are password-
protected to prevent accidental use.
Requirements
You must have the items identified in “Hardware Requirements for the
Programming Device” on page 9.
Access the Super User Mode
Start the software as in “Run the Apex & ApexPro Programming Box
Software” on page 13 and then access the Super User mode of the software
by following these steps:
1. Select the Communication status button, reference H in “Program Apex
Transmitter Window” on page 23 and reference C in “Program Apex
Transmitter Technical Functions Window” below.
2. Type the password mms_aps.
3. Select OK.
4. The Program Apex Transmitter window will display additional features.
5. To exit the Super User mode, select the Communication status button
again.
710A
CE
A B
D
Table 5. Program Apex Transmitter Technical Functions Window
Ref Definition
A Serial number
B Alarm pause time
C Communication status button
D Code version number
E Test Status results
Draft