User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Apex Transmitter
- 3 ApexPro CH Transmitter
- Program the Transmitter’s Basic Functions
- View Transmitter Diagnostics
- Update Transmitter Firmware
- ApexPro CH Appendices
- 4 ApexPro Transmitter
Revision A - Draft 7 APEX, ApexPro, and ApexPro CH Transmitter Programming Instructions 41
2001989-135
ApexPro CH Transmitter
View Firmware Codes
Serial Number
Displays the serial number of the transmitters’s PCB (Printed Circuit
Board).
Code Version Numbers
Display of the part numbers and their versions (reference I in “Program
ApexPro CH Transmitter Window” on page 35) for the application firmware
(used when the transmitter is operating independently to send patient data),
and the manufacturing firmware (used when the transmitter is plugged into
the programming device).
Communication Status Button
The Communication status button (reference J in “Program ApexPro CH
Transmitter Window” on page 35) revolves clockwise to indicate that the
hardware (transmitter, programming device, and the PC) is properly
connected and the software is processing normally.
In addition, by clicking on this button, authorized personnel can access high-
level functions (Super User). A password is needed to access these functions.
See “Appendix 2: Access ApexPro CH Technical Functions (Super User)” on
page 52 for more information.
341A
345A
305A
Draft