User Manual

48 APEX, ApexPro, and ApexPro CH Transmitter Programming Instructions Revision A - Draft 7
2001989-135
ApexPro CH Transmitter
Verify Correct Operation
Verify the Transmitter’s Firmware Code Version
The transmitter’s code version displays in the Program ApexPro CH
Transmitter window. Verify that the App: text string matches the .app file
name listed on the data disk. Also verify that the Mfg: text string matches
the .mfg file name listed on the data disk.
Confirm that all Power-up Self Test Status messages indicate Passed. (See
“Power-Up Self-Test Failures” on page 50.) Call Technical Support (page 51)
if any failures occur.
Verify Transmitter Operation
Complete the checkout procedures identified in the ApexPro Telemetry
Transmitter Service Manual.
Track the Software Upgrade (Field Engineer Use Only)
For this upgrade, complete the following.
1. Use the MDOC number found on the data disk as the tracking number in
the PROACTIVE REPAIR# window of the Clarify case.
2. Bill travel and labor only as authorized by Marketing - CIC/ApexPro
using the MDOC number as the PO#.
3. Fill out and fax the “Update Installation Verification Form” provided
with this manual. (Please make additional copies as needed.)
345A
Draft