User Manual

70 APEX, ApexPro, and ApexPro CH Transmitter Programming Instructions Revision A - Draft 7
2001989-135
ApexPro Transmitter
settings appear greyed out. In addition, sometimes the LA LED light on
the transmitter flashes and sometimes all the LED lights flash.
12. Wait until the first line in the message box displays the text Connected to
the transmitter. If there are any problems, refer to “ApexPro Appendices”
on page 76.
Download File
This function helps determine which firmware file to download, either the
application code or the manufacturing code.
1. Access the high-level technical functions of the software as described in
“Access the Super User Mode” on page 79.
2. The Program ApexPro Transmitter window will display additional
features, including a Download Functions section (reference D in
“Appendix 2: Access ApexPro Technical Functions” on page 79.)
3. Select the Download File button.
4. Follow the instructions at this screen.
 If the RA light is flashing, select RA Flashing and then select OK.
 If the LA light is flashing, select LA Flashing and then select OK.
 If neither LED is flashing on the transmitter, there is no need to
update the firmware, so you can select Cancel.
Change the IQ Table Version
The IQ table is used to generate the RF modulation in the transmitter.
If you receive a new IQ table file:
1. Access the high-level technical functions of the software as described in
“Access the Super User Mode” on page 79.
2. Select the Load I/Q Table button, reference B in “Appendix 2: Access
ApexPro Technical Functions” on page 79.
430A
440A
Draft