User Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Apex Transmitter
- 3 ApexPro CH Transmitter
- Program the Transmitter’s Basic Functions
- View Transmitter Diagnostics
- Update Transmitter Firmware
- ApexPro CH Appendices
- 4 ApexPro Transmitter
Revision A - Draft 7 APEX, ApexPro, and ApexPro CH Transmitter Programming Instructions 79
2001989-135
ApexPro Transmitter
Appendix 2: Access ApexPro Technical Functions
Several high-level technical functions are available by following the steps in
“Access the Super User Mode” below. Technical functions are password-
protected to prevent accidental use.
Requirements
You must have the items identified in “Hardware Requirements for the
Programming Device” on page 9.
You may have a software upgrade kit, PN 2007039-005, containing one
software upgrade CD.
Access the Super User Mode
Start the software as in “Run the Apex & ApexPro Programming Box
Software” on page 13 and then access the Super User mode of the software
by following these steps:
1. Select the Communication status button, reference L in “Program
ApexPro Transmitter Window” on page 59 and reference C below.
2. Type the password mms_aps.
3. Select OK.
4. The Program ApexPro Transmitter window will display additional
features.
605A
CBA
D
E
Draft