Operator's Manual

Revision A Model 340 Telemetry System 3-9
2006899-001
Controls, Indicators, and Connectors: Transmitter
Table 3-4. Transmitter Top Panel
Name Description
A Loops Loops for attaching the carrying strap.
B Headset Connector
Connect the headset to this receptacle to listen to
the fetal heart rate derived from ultrasound.
C
Remote Event Mark
Connector
Connect a Corometrics Remote Event Marker to
this receptacle. When the marker’s button is
pressed for at least one second, an event mark
signal is transmitted and one of the following marks
prints on the strip chart paper:
n : This annotation is commonly used to record
an “event.” This mark is available on all
Corometrics-brand monitors.
n : This annotation is commonly used as an
indication that the mother has perceived fetal
movement. (Refer to your monitor’s operator’s
manual to learn if your monitor supports this
feature. Refer to your monitor’s service manual
for information about enabling the option.)
D Power Switch
Moving the switch to the on position (I) turns on the
transmitter; moving the switch to the off position
(O), turns off the transmitter.
E Antenna Connector
Twist-on connector for attaching the transmitter
antenna.
F
M