Step-by-step Instructions

Revision A Model 340 Telemetry System 4-7
2006899-001
Setup Procedures: Setting Up the Transmitter
Setting Up the Transmitter
Installing Batteries
127(If the transmitter will not
be used for an extended period of
time, remove the batteries to
prevent damage due to battery
leakage.
1. Turn off the transmitter.
2. Locate the battery compartment cover plate on the transmitter rear
panel.
3. Remove the cover plate. Use your thumb to lift the raised end.
Figure 4-9. Accessing the Batteries
4. Remove the depleted batteries.
&$87,21
BATTERY DISPOSAL—Follow the battery
manufacturer’s recommendations or your hospital policy
for the disposal of used batteries.
DANGER: POSSIBLE EXPLOSION HAZARD IF USED IN THE PRESENCE OF FLAMMABLE ANESTHETICS.
CAUTION: REFER SERVICE ONLY TO QUALIFIED PERSONNEL
!
BATTERY COMPARTMENT
Battery Compartment
Lift
Here