GE QACT17A User Manual

Table Of Contents

Central/Lock Function: /

Function is active only when system has a central control, such as

the YCZ-A004. This setting is activated only by the central Control.

Fahrenheit Setting and Display:

• Fahrenheit to Celsius: Adjust set temperature to lowest

setting; 60°F when ECO is o. Press and hold TEMP- for 15

seconds. During the 15 second count the display will beep

once at 5 seconds and display error codes. Then after another

5 seconds, the display will beep once again and display 00,

after 5 more seconds the display will change to Celsius.

• Celsius to Fahrenheit: Adjust set temperature to highest

setting; 30°C when Eco is o. Press and hold TEMP+ for 15

seconds. During the 15 second count, the display will beep

once at 5 seconds and enter Special Functions menu. Then

after another 5 seconds, the display will show 00, after 5 more

seconds the display will change to Fahrenheit.

Lock Settings / Fahrenheit Setting

Central Control On/O function only available.

Central Lock No functions available.