User's Manual

Collision Avoidance System: CAS-CAM/RF® Operating Instructions
Document Number: CAS-CAM_RF Operating Instructions (with FCC
precautions)_18June2010.doc
Page 107 of 126
Issue: E
17 FAULT REPORTING
On all occasions where a fault is observed on the equipment, the details and corrective
action taken should be reported on the “Fault Report Sheet” as detailed in Appendix 1.
The following details the recommended procedure for reporting faults:
1. For an observed fault, record the details on the Fault Report Sheet.
2. Attempt to rectify the fault as per the instructions in section 16 ‘Troubleshooting’ and
send a copy to AMT. If the fault cannot be rectified contact the approved AMT Service
Agent and give them a copy of the Fault Report Sheet.
3. Arrange with the AMT Service Agent to repair the fault and detail the cause and
remedy on the Fault Report Sheet.
4. The AMT Service Agent will then return the Fault Report Sheet to the originator of the
report and will send a copy to AMT.
18 ACCESSORIES
18.1 Heavy Vehicle Display Unit – Sun Visor (PROD0164)
An option exists to attach a Sun Visor over the Display Unit in order to reduce the level of
glare from the sun on the video display screen. This option is recommended as standard
for Display Units mounted at dashboard level.