User's Manual

Collision Avoidance System: CAS-CAM/RF® Operating Instructions
Document Number: CAS-CAM_RF Operating Instructions (with FCC
precautions)_18June2010.doc
Page 113 of 126
Issue: E
21.2 Camera Unit (PROD0118)
Image Sensor 1/3” CCD Image Sensor
Chip Size 6.0 mm (W) x 4.96 mm (H)
CCD Total Pixels 500 (W) x 582 (H)
Scanning System 625 Lines (PAL)
50 fields/sec
Sync System Internal
Minimum Illumination 0.03 Lux at F1.2
Resolution 380 TV Lines
Field of View 123 degrees Horizontal & 91 degrees Vertical (153
degrees Diagonal). Narrower field of views available on
request.
Signal to Noise Ratio Better than 48dB (AGC OFF)
White Balance Auto
Auto Iris AES
Electronic Shutter Auto: Up to 1/100,000 sec continual
Video Output Signal
1.0V p-p composite video at 75 ohm & Υ/C output
Gamma Correction 0.45
Operating Temperature
-10°C to 50°C
Storage Temperature
-20°C - 60°C
Operating Humidity 85 % RH max.
Storage Humidity 85 % RH max.
Protection Rating IP 66 rated enclosure
Overall Dimension 130 mm (W) x 200 mm (H) x 180 mm (D)
Weight 1.3kg
Power Supply DC 12V (+/- 10%) @ 100mA (powered from Display Unit
for 2 camera system or from Expansion Unit for 6
camera system maximum)
Lens Mount On board Lens (f2.27mm)
Connector Input Power / Video / RS-485 comms (6-way MILSPEC
panel plug)
Input Signals
• Camera Unit power (12 VDC, 800 mA max)
Output Signals
• Camera Unit Video Signal (differential 1Vp-p / 75
ohm)
• RS-485 comms bus (connected to Display Unit & all
Camera / RF Units)