User's Manual
Collision Avoidance System: CAS-CAM/RF® Operating Instructions
Document Number: CAS-CAM_RF Operating Instructions (with FCC
precautions)_18June2010.doc
Page 121 of 126
Issue: E
21.9 Mobile Plant & Equipment System (PROD0225)
Power Source DC 12V +/- 10% (powered from suitable external 12VDC
power source via fused circuit – e.g. permanent power
supply, battery power supply, solar power supply with
battery backing)
Power Consumption 57W maximum
Operating Temperature
0°C - 60°C
Storage Temperature
-20°C - 60°C
Operating Humidity 85 % RH max.
Storage Humidity 85 % RH max.
Protection Rating
• Mobile Plant & Equipment Unit - IP 54 rated
enclosure
• Dash Alarm Unit – IP 32 rated enclosure
Overall Dimension
• Mobile Plant & Equipment Unit – 200mm (W) x
250mm(H) x 165mm (D) (excluding magnetic
base)
• Dash Alarm Unit – 64 mm (W) x 25 mm (H) x 108
mm (D)
Weight
• Mobile Plant & Equipment Unit – 1.9 kg (excluding
magnetic base option)
• Dash Alarm Unit – 82 g
Connectors Mobile Plant & Equipment Unit (PROD0250)
• Power & I/O (12-way MILSPEC panel plug)
• Antenna (UHF panel socket)
Dash Alarm Unit (PROD0211)
• Power & Inputs (5-way subminiature DIN)
• RS-232 Interface (DB-9 panel socket)
Input Signals Mobile Plant & Equipment Unit
• Input Power (12 VDC, 55W max.)
• Antenna
Dash Alarm Unit
• Power (12VDC, 0.6W typical)
• RS-232 data communications
• Alarm signal
Output Signals Mobile Plant & Equipment Unit
• Rotating Beacon Lamp (12V, 55W)
• RS-232 data communications
• Alarm Unit Power
• Alarm signal
Dash Alarm Unit
• Power indicator (POWER)
• Alarm indicator (DETECT) & buzzer (volume set by
internal jumper links)
• RS-232 data communications
Fuse Fuse to be installed in-line with power supply circuit
(7.5A, 20 mm x 5 mm slow blow)