Owner's Manual

19
Dishwasher
Settings
Setting a signal
If you want the machine to signal when the wash is complete, you can program it to do this.
The machine is set without a signal by default.
1. Switch o the dishwasher at the main switch.
2. Hold in the DELAY start button at the same time as you press the
main switch. The button ashes. Release the button.
3. Press the CYCLE button – when the Auto wash symbol lights, the
signal is activated.
4. Press the START/RESET button and the setting will be stored until next time
you want to make a change.
or Reset
1. Switch o the dishwasher with the main switch.
2. Hold in the DELAY start button at the same time as you press the
main switch. The button ashes. Release the button.
3.Press the CYCLE button – when the Auto wash symbol goes out, the
signal is deactivated.
4. Press the START/RESET button and the setting will be stored until next time
you want to make a change.