Built-In Compactor Specifications

Dimensions and Installation Information (in inches)

Listed by

Underwriters

Laboratories

For answers to your Monogram,

GE Profile

™

appliance questions, visit our website at

ge.com or call GE Answer Center

service,

800.626.2000.

Specification Created 9/08

160009

This compactor is designed as a built-in appliance

only. It may be located in any convenient space

under a countertop.

DO NOT OPERATE FREE-STANDING because the compactor

will tip over when the drawer is pulled out.

Additional Specifications: A 115 Volt, 60 Hz. power supply

is required. An individual properly grounded branch circuit

protected by a 15- or 20-amp circuit breaker or time delay

fuse is recommended. Install a properly grounded 3-prong

electrical receptacle recessed into the back wall. Electrical

outlet location is critical for proper cord storage when

compactor is installed.

If the compactor is to be located in or near a corner of base

cabinets, allow 6” minimum clearance from the corner for

bag removal on the right side.

Front View (not to scale)

ZCGP150PII - GE Monogram

™

15" Built-In Compactor for Custom Panels

15"

29-3/8"

3/4"

Thick

Custom

Panel

PAGE 1
ZCGP150PII - GE Monogram™ 15" Built-In Compactor for Custom Panels Dimensions and Installation Information (in inches) This compactor is designed as a built-in appliance only. It may be located in any convenient space under a countertop. DO NOT OPERATE FREE-STANDING because the compactor will tip over when the drawer is pulled out. Front View (not to scale) Additional Specifications: A 115 Volt, 60 Hz. power supply is required.
PAGE 2
ZCGP150PII - GE Monogram™ 15" Built-In Compactor for Custom Panels Features and Benefits • Hidden Controls - The controls are hidden behind the compactor door, lending a beautiful designer appearance • Built-In Only - The compactor is built-in to adjacent cabinetry for an upscale appearance • 1.4 Cu. Ft.