DL 4819b9549723c992563f9f0361cf

31-10724-7 11

Installation Instructions

INSTALLATION – VENTED TO THE OUTSIDE

INSTALL DUCT BRACKET

VENTING TO THE REAR (HORIZONTAL EXHAUST)

OR STRAIGHT UP TOP (VERTICAL EXHAUST)

■ Temporarily install the 2 small screws into the sides of

the duct bracket. Remove the screws. This will ensure

ease of final installation.

■ Position the upper duct bracket against the wall and

ceiling, aligned with CL pencil mark and CL on the

bracket.

■ Mark the 4 screw locations of the bracket.

■ Remove the bracket.

■ Drill 1/8″ pilot holes in marked bracket location.

■ If pilot holes do not enter studs, enlarge the holes 3/8″

and install wall-fastener anchors. Drive screws into the

fasteners to allow anchors to expand against the wall

material. Remove the screws.

■ Secure the bracket to the ceiling and wall with wood

screws and/or wall-fastener screws.

Top or

vertical

exhaust

Rear or

horizontal

exhaust

Duct bracket