Installation instructions

6
Installation Preparation
TOOLS REQUIRED
Safety Glasses
Cut Resistant Gloves
Drill and
1/16” Bit
Measuring Tape
Phillips Screwdriver
Hand Saw
MATERIALS REQUIRED (provided)
MATERIALS REQUIRED (not provided)
Runners must be level, rigidly mounted and capable
of supporting 150 pounds.
Level
4 Wood Screws
2x2 or 2x4
Wood Block
for Anti-Tip
Security
Adhesive or other hardware for installing
runners or shelf to support warmer drawer
2x2 or 2x4
Lumber for
Runners
REMOVE PACKAGING
Place Warming Drawer on carton or protective pad to prevent damage to drawer front or finished flooring.