User Manual

INSTALL MOUNTING SCREWS

• Drill pilot holes through the side flanges, 2 on

each side.

• Drive the color-matched screws into the side

flange.

FINALIZE INSTALLATION

• Turn the power on at the source. The interior

light should come on when the door is opened.

• Refer to the Owner

’

s Manual for operating

instructions.

Printed in Korea

Installation

• Align bottom trim tabs to slots in the bottom

of the oven.

• Secure the bottom trim to the bottom of the oven

using 3 brass screws provided.

SLIDE THE OVEN INTO THE

CUTOUT

CAUTION

Two people are required

to lift the oven into the opening. Grasp the

bottom at the front and rear. DO NOT USE THE

HANDLE TO LIFT THE OVEN. DAMAGE WILL

OCCUR!

PRECAUCIÓN

Se requieren

dos personas para levantar el horno e introducirlo

en la abertura. Agarre la parte inferior por delante

y por detrás. NO USE LA MANIJA PARA

LEVANTAR EL HORNO. ¡PUEDE DA—ARSE!

• Lift and hold the oven at the front of the

opening.

Hold the oven at a 45º angle and plug in the

power cord.

• Carefully, slide the oven into the cabinet part

way. Leave the oven a few inches forward of

the cabinet frame.

• Check to be sure the power cord is not trapped

under the oven or along the sides of the oven.

INSTALL BOTTOM TRIM