Installation Manual

22
Installation Instructions
REVERSING THE DOOR (OPTIONAL)
B
MODELS WITH FABRIC REFRESH
FEATURE (cont.)
B
MODELS WITH FABRIC REFRESH
FEATURE (cont.)
11
Rotate the outer door 180°. Place hinges into
position, making sure you mount the hinges on
the side opposite the pocket. Mount the inner
door back into the outer door frame and secure
with screws removed in step 8. Screw the door
hinges in and insert the hinge caps.
Outer door
Hinge
screws
Plastic
Caps
Inside
screws
Inside
screws
Hinge
Hinge
Inner door
12
Install the harness cover onto the front panel.
14
Install the 4 plastic caps removed in step 1 into the
4 right side front panel holes.
NOTE: To return the door to the original setup, follow
these instructions, swapping “left” and “right”.
When you finish
Plug the dryer back into
its electrical outlet.
13
Mount the assembled door on the 2 upper left side
hinge screws installed in step 2. Move the hinge
screws loosened in step 2 into the lower left side
screw holes and firmly tighten all 4 screws.
Plastic Cap (4)
Right side of
front panel
Harness
Cover
Door
Hang door and
tighten screws