Manualshelf

Quick Specs

ManualsBrandsGE Profile ManualsAppliances30 in. Gas-on-Glass DownDraft Gas Cooktop in Black with 4 Burners
123
Dimensions anD installation information
Listed by
Underwriters
Laboratories
PGP9830DJ/tJ
GE Profile
™
Series 30" Downdraft Gas Cooktop
For answers to your Monogram
®
or GE
®
appliance
questions, visit our website at geappliances.com
or call GE Answer Center
®
service, 800.626.2000.
Specification Revised 4/15
*Note: A 5" minimum spacing to adjacent side wall is required
Dimension and installation information are shown in inches.
Wall INstallatIoN: Wall installations
require 25" countertop depth. When cabinet
is flush against the wall, the fan housing can
be rotated to the horizontal position for direct
venting through rear wall. Make a countertop
cutout in the range cabinet according to unit
dimensions and installation type. Duct hole is
positioned in back of cabinet for through-the-
wall ducting.
PeNINsula or IslaNd INstallatIoN:
For peninsula/islands a minimum 26"countertop
depth is suggested. Blower should be in vertical
position. Island or peninsula cabinets may
require adjustment in cutout depth and/or
location within the width dimensions. Duct hole
is positioned in bottom of cabinet for island or
peninsula installation.
slab INstallatIoN: For peninsula or
island installation and rear wall ducting, 6" PVC
duct or locally approved piping should be used
if installing under a poured concrete slab.
INstallatIoN INformatIoN: Before
installing, consult installation instructions,
packed with product, for current dimensional
data.
Note: These cooktops are approved for indoor
use only.
40
Long
20
9
4
10-1/2
16
C
L
Cabinet Dimensions (in inches)
21
7
⁄8ʺ
(21
15
⁄16ʺ SS)
20
1
⁄2ʺ
22ʺ
29
3
⁄4ʺ
2
3
⁄16ʺ
(2
1
⁄4ʺ
SS)
28
3
⁄4ʺ
25
1-7/8"
MIN. Required*
20-5/8
Cut-out Dimensions (in inches)
28-7/8
*U.L. Requirement.
Note: A 5" minimum spacing to adjacent side wall is required
(29
13
⁄16ʺ SS)
21
7
⁄8ʺ
(21
15
⁄16ʺ SS)
20
1
⁄2ʺ
22ʺ
29
3
⁄4ʺ
2
3
⁄16ʺ
(2
1
⁄4ʺ SS)
28
3
⁄4ʺ
25
1-7/8"
MIN. Required*
20-5/8
Cut-out Dimensions (in inches)
28-7/8
*U.L. Requirement.
Note: A 5" minimum spacing to adjacent side wall is required
(29
13
⁄16ʺ SS)

Summary of content (3 pages)