Specification

ManualsBrandsGE Profile ManualsAppliances30 in. Gas-on-Glass DownDraft Gas Cooktop in Black with 4 Burners

Dimensions anD installation information

Listed by

Underwriters

Laboratories

PGP9830DJ/tJ

GE Profile

™

Series 30" Downdraft Gas Cooktop

For answers to your Monogram

or GE

appliance

questions, visit our website at geappliances.com

or call GE Answer Center

service, 800.626.2000.

Specification Created 2/15

*Note: A 5" minimum spacing to adjacent side wall is required

Dimension and installation information are shown in inches.

Wall InstallatIon: Wall installations

require 25" countertop

depth. When cabinet is

flush against the wall, the fan housing can be

rotated to the horizontal position for direct venting

through rear wall. Make a countertop cutout in the

range cabinet according to unit dimensions

and installation type. Duct hole is positioned in

back of cabinet for through-the-wall ducting.

PenInsula or Island InstallatIon:

For peninsula/islands a minimum 26"

countertop

depth is suggested. Blower should be in vertical

position. Island or peninsula cabinets may require

adjustment in cutout depth and/or location within

the width dimensions. Duct hole is positioned

in bottom of cabinet for island or peninsula

installation.

slab InstallatIon: For peninsula or island

installation and rear wall ducting, 6” PVC duct

or locally approved piping should be used if

installing under a poured concrete slab.

InstallatIon InformatIon: Before

installing, consult installation instructions, packed

with product, for current dimensional data.

note: These cooktops are approved for indoor

use only.

40

Long

10-1/2

C

Cabinet Dimensions (in inches)

⁄16ʺ

(22

⁄16ʺ SS)

⁄2ʺ

22ʺ

⁄8ʺ

(30ʺ SS)

⁄16ʺ

⁄4ʺ

SS)

⁄4ʺ

1-7/8"

MIN. Required*

20-5/8

Cut-out Dimensions (in inches)

28-7/8

*U.L. Requirement.

Note: A 5" minimum spacing to adjacent side wall is required

⁄16ʺ

(22

⁄16ʺ SS)

⁄2ʺ

22ʺ

⁄8ʺ

(30ʺ SS)

⁄16ʺ

⁄4ʺ SS)

⁄4ʺ

1-7/8"

MIN. Required*

20-5/8

Cut-out Dimensions (in inches)

28-7/8

*U.L. Requirement.

Note: A 5" minimum spacing to adjacent side wall is required

Summary of content (3 pages)

PAGE 1
PGP9830DJ/TJ GE Profile™ Series 30" Downdraft Gas Cooktop 227⁄16ʺ (229⁄16ʺ SS) 297⁄8ʺ (30ʺ SS) Dimensions and Installation Information 22ʺ Wall Installation: Wall installations require 25" countertop depth. When cabinet is flush against the wall, the fan housing can be rotated to the horizontal position for direct venting through rear wall. Make a countertop cutout in the range cabinet according to unit dimensions and installation type.
PAGE 2
PGP9830DJ/TJ GE Profile™ Series 30" Downdraft Gas Cooktop Venting Options Dimensions and Installation Information Installing the Ductwork: Use galvanized or aluminum duct in 6" round or 3-1/4" x 10" size, or combination of both. PVC duct or locally approved piping should be used if installing under a poured concrete slab. Local building code must be followed in specifying type and schedule of all duct used. Note: Ductwork must be vented to outside.
PAGE 3
PGP9830DJ/TJ GE Profile™ Series 30" Downdraft Gas Cooktop Features and Benefits Downdraft exhaust - Powerful exhaust system effectively pulls smoke and steam out of the kitchen Gas on glass cooktop - Sleek and easy to clean Sealed cooktop burners - Keep spillover contained on cooktop, making cleaning quick and easy 11,000 BTU all-purpose burner - Delivers a wide range of heat output for most cooking needs Dishwasher-safe grates and knobs - Safe to clean in the dishwasher Model PGP9830TJWW - True white Mod