Quick Specs

ManualsBrandsGE Profile ManualsAppliances30 in. Gas-on-Glass DownDraft Gas Cooktop in Stainless Steel with 4 Burners

PGP9830SJ

GE Profile

™

Series 30" Downdraft Gas Cooktop

Specification Revised 4/15

*Note: A 5" minimum spacing to adjacent side wall is required

Dimension and installation information are shown in inches.

Wall INstallatIoN : Wall installations

require 25" countertop depth. When cabinet

is flush against the wall, the fan housing can

be rotated to the horizontal position for direct

venting through rear wall. Make a countertop

cutout in the range cabinet according to unit

dimensions and installation type. Duct hole

is positioned in back of cabinet for through-

the-wall ducting.

PeNINsula or IslaNd INstallatIoN:

For peninsula/islands a minimum 26"

countertop depth is suggested. Blower should

be in vertical position. Island or peninsula

cabinets may require adjustment in cutout

depth and/or location within the width

dimensions. Duct hole is positioned in bottom

of cabinet for island or peninsula installation.

slab INstallatIoN: For peninsula or

island installation and rear wall ducting, 6"

PVC duct or locally approved piping should be

used if installing under a poured concrete slab.

INstallatIoN INformatIoN: Before

installing, consult installation instructions,

packed with product, for current dimensional

data.

Note: These cooktops are approved for

indoor use only.

40

Long

10-1/2

C

Cabinet Dimensions (in inches)

⁄8ʺ

(21

⁄16ʺ SS)

⁄2ʺ

22ʺ

⁄4ʺ

⁄16ʺ

⁄4ʺ

SS)

⁄4ʺ

1-7/8"

MIN. Required*

20-5/8

Cut-out Dimensions (in inches)

28-7/8

*U.L. Requirement.

Note: A 5" minimum spacing to adjacent side wall is required

(29

⁄16ʺ SS)

⁄8ʺ

(21

⁄16ʺ SS)

⁄2ʺ

22ʺ

⁄4ʺ

⁄16ʺ

⁄4ʺ SS)

⁄4ʺ

1-7/8"

MIN. Required*

20-5/8

Cut-out Dimensions (in inches)

28-7/8

*U.L. Requirement.

Note: A 5" minimum spacing to adjacent side wall is required

(29

⁄16ʺ SS)

dImeNsIoNs aNd INstallatIoN INformatIoN

For answers to your Monogram,

GE Profile

™

or GE

appliance questions, visit our website

at geappliances.com or call GE Answer Center

service, 800.626.2000.

Listed by

Underwriters

Laboratories

Summary of content (3 pages)

PAGE 1
PGP9830SJ GE Profile™ Series 30" Downdraft Gas Cooktop 217⁄ 8ʺ (2115⁄16ʺ SS) Dimensions and Installation Information Slab Installation: For peninsula or island installation and rear wall ducting, 6" PVC duct or locally approved piping should be used if installing under a poured concrete slab. Installation Information: Before installing, consult installation instructions, packed with product, for current dimensional data. Note: These cooktops are approved for indoor use only.
PAGE 2
PGP9830SJ GE Profile™ Series 30" Downdraft Gas Cooktop Venting Options Installing the Ductwork: Use galvanized or aluminum duct in 6" round or 3-1/4" x 10" size, or combination of both. PVC duct or locally approved piping should be used if installing under a poured concrete slab. Local building code must be followed in specifying type and schedule of all duct used. Note: Ductwork must be vented to outside. Do not vent into a wall, ceiling, crawlspace, attic or any concealed space.
PAGE 3
PGP9830SJ GE Profile™ Series 30" Downdraft Gas Cooktop Features and Benefits Downdraft exhaust - Powerful exhaust system effectively pulls smoke and steam out of the kitchen Gas on glass cooktop - Sleek and easy to clean ealed cooktop burners - Keep spillover contained on cooktop, S making cleaning quick and easy 1 1,000 BTU all-purpose burner - Delivers a wide range of heat output for most cooking needs ishwasher-safe grates and knobs - Safe to clean in D the dishwasher tainless steel trim - Comple